Software Required; Configuring Integrated Sas Hardware Raid 2; Installation Tips; Chipset Driver Installation - Acer Altos R720 Installation & Configuration Manual

Hot-swap
backplane

Software Required

The management utility of integrated SAS hardware RAID 2 can be found in
the EasyBUILD 7.1 build 100 (or later).
Software
RAID Web Console
2
Intel PROSet Utility

Configuring integrated SAS hardware RAID 2

Please refer to the APPENDIX B. for the integrated SAS hardware RAID 2
configuration.

Installation Tips

NOTE. There is no built-in driver Integrated SAS hardware RAID 2 in the
Windows Server 2003. If you do not have the optional internal USB floppy drive,
you need an external USB floppy drive for applying driver during the OS
installation.
As Windows 2000 can't recognize the integrated SAS hardware RAID 2,
1.
you need to make a driver diskette from the EasyBUILD 7.1 build 100 first
before the installation.
Press F6 at the start of installation to provide the driver disk for the
2.
onboard ROMB.
Select "Intel(R) SAS RAID Controller Driver (Windows 2000)" as target
3.
driver
After loading the driver from diskette, follow the normal procedure to
4.
finish the installation.

Chipset Driver Installation

After the installation completes, you would see the following other
1.
devices listed in Device Manager.
39
5.0.6262.1 EasyBUILD 8.0 build 200 (or later)
Version
2.63 EasyBUILD 8.0 build 200 (or later)
13.0.44.0 EasyBUILD 8.0 build 200 (or later)
Altos R720 Installation Configuration Guide
EasyBUILD Version