Basic Operation; Making Calls; Receiving Calls; Redialing - Bell Sonecor BE-3850 Installation And Operating Manual

BASIC OPERATION

Making Calls

1. Pick up the handset from the base and press T.
2. Wait until you hear a dial tone, and then dial the
number you wish to dial.
JOHN SMITH
555-555-1212
3. When you are finished talking, press the T key or
9:45 10/11 AM # 38 RPT 3
NEW
place the unit back into the base to end the call.
CID Redial
Talk
Delete
Note: The CHARGE light on the base will illuminate
when the line is active.
Edit Menu Save
Flash Mute MEM

Receiving Calls

When you hear the phone ring:
1. If the handset is in the base, lift the handset from the
base. The handset will turn on. There is no need to
push the T key if the unit is on the base when the
call comes in. This auto-answer feature can be
programmed off (see "Settings," page 27).
JOHN SMITH
555-555-1212
2. If the handset is off the base, you will need to press
RPT
9:45 10/11 AM # 38 3
NEW
T to answer the call. The display will show the
CID Redial
Talk
Delete
Caller ID information after the first ring.
Edit Menu Save
Flash Mute MEM
3. When you are finished, push T or place the handset
back on the base.
TALK
00 MIN 04 SEC
RING
9: 4 5 10/11 0 11
AM
NEW TOTAL
TALK
00 MIN 04 SEC
19
BASIC OPERATION

Redialing

1. Press T.
2. Wait until you hear a dial tone, and then press R
to redial the number last dialed (up to 32 digits).
JOHN SMITH
Note: You can also press R/DELETE first to
555-555-1212
# RPT
9:45 10/11 AM 38 3
NEW
display the number and then press T to dial the
CID Redial
Talk
number displayed.
Delete
Edit Menu Save
Flash Mute MEM

Additional Options

To: Do This:
Press L M during a call until the desired volume level
Adjust the volume in the
earpiece is reached.
Press the < key after the phone is in use. The phone
Switch to temporary tone
dialing will remain in tone dialing mode for the duration of the call.
Press E to go to the new caller.
Receive a call waiting call
Press E again to go back to the original caller.
Press the L key.
Mute a call
Press L to continue speaking to the caller.
TALK
00 04
MIN SEC
20