Location Of Controls And Features; Handset - Bell Sonecor BE-3850 Installation And Operating Manual

LOCATION OF CONTROLS AND FEATURES

Handset

Option Key
Up/Down Key
JOHN SMITH
555-555-1212
9:45 10/11 AM #
NEW
CID
Talk Key Talk
Temporary Tone/
View Left Key
Edit
Menu
Flash/Edit Key
Flash Mute
7
New Call Light
Channel Key
LCD
Display
38 RPT 3
Redial
Redial/Delete Key
Delete
Caller ID Key
Headset Jack
Dial Pad
View Right Key
Mute/Menu Key
Save
MEM Memory Key
Ringer Switch
Microphone
LOCATION OF CONTROLS AND FEATURES
Talk T
The T key is used to access the telephone line or end a call.
Caller ID Key C
The C key is used to review Caller ID information stored in memory.
Redial Key R/DELETE
When the phone is idle or off-hook, press R to redial the last number dialed. When
viewing or editing menus and logs, the R/DELETE key is used to erase digits and
single or multiple entries from the phone book and Caller ID directories. R is also
used to insert a programmable pause into a number stored in the phone book.
Channel Key
The CH key, if pressed when the line is off-hook, will scan up to 50 channels and
select the clearest one to provide the best possible reception.
Option Key
The Option key, located on the right side of the handset, is used to change the
7/10/11 digit dialing mode during caller ID callback.
Mute Key L/MENU
The L/MENU key is used to temporarily mute the handset microphone. This key is
also used to access the programmable functions of your phone.
Up/Down Key L M
The L M key lets you scroll through menus and logs, and adjust the handset volume.
Dial Pad
Numeric keys are used in the conventional manner for dialing.
Flash Key E/EDIT
The E/EDIT key is used to access telephone company services, like call waiting. It
is also used to create and edit phone book entries.
Memory Key l/SAVE
Use l/SAVE to program and retrieve the numbers in the speed dial directory. The
l/SAVE key is also used to save numbers into the phone book and other settings.
Temporary Tone/View Left key <
If the base is set to pulse dialing, pressing < causes subsequent digits to be dialed
out using tone until the line is put back on hook. Also used to view the left part of the
display and move the cursor left when editing.
View Right Key >
Used to view the right part of the display and move the cursor right when editing.
Headset Jack
Allows using a headset for hands-free convenience.
Ringer Switch (Hi/Low/Off)
Adjust the switch to select the ringer volume – choose between Hi, Low, and Off.
8