Care And Maintenance - Bell BE-70PS Owner’s Owner's Manual

CARE AND MAINTENANCE

Your Caller-ID telephone has been designed to give years of trouble free ser-
vice. It is a sensitive electromechanical instrument. To assure its longevity,
please read the following maintenance instructions.
1. Keep the telephone away from heat as high temperatures can shorten the
life of the electrical components and distort or melt its plastic parts.
2. The telephone should be kept free of dust and moisture. If it gets wet, wipe
it dry immediately. Liquids can contain minerals that can corrode electronic
circuits.
3. Handle your telephone gently and carefully. Dropping it can cause serious
damage to circuitry, or the plastic case, which may result in causing it to
malfunction.
4. Do not use any type of chemical or any abrasive powder to clean the cabi-
net. Use only mild detergents on a soft, damp cloth to clean the telephone.
5. Your telephone has built-in surge protection circuits that meet or exceed
FCC requirements. However, an incident such as a lightning strike at or
near the telephone lines, could cause series damage.
6. If installed in an area with frequent or severe electrical storms, it is sug-
gested that the telephone be disconnected during these storms or that ad-
ditional surge suppression equipment be added to the installation.
7. In the case of trouble with the telephone, do not attempt to repair the tele-
phone yourself. It is the responsibility of users requiring service to report
the need for service to our Service Department. They will make the neces-
sary arrangements for repair or replacement.
6. If you should have any questions about the operation of your BE-70PS
Caller-ID telephone, please call our Service Department at 914-968-2100,
between the hours of 9:00 A.M. and 4:30 P.M., Monday through Friday
eastern time. Or you may contact TT Systems LLC for technical assistance via
our Internet Website http://www.ttsystems.com.
- 23 -
23