Deleting Individual Call Records; Deleting All Call Records - Bell BE-70PS Owner’s Owner's Manual

OPERATION - continued
4. Once you have reviewed all the new call records, the repeat call indicator
will not be displayed.
5. When you have reviewed all call records, "END OF LIST" will appear on
the display.
6. If the NEW call LED is still flashing when the display goes back to the
Stand-By Screen, there are new calls that you have not yet reviewed.
7. If you have not have any calls in memory, the display will remain in the
Stand-By Screen.
8. The Caller-ID information for the last 70 calls received is automatically
stored in memory. After 70 calls have been received, new call records will
replace the oldest call records.

Deleting Individual Call Records

When you are reviewing a call record, you can delete an individual call record
from memory by following these steps:
1. Press the review UP or review DOWN button to locate the call record you
wish to delete.
2. Rapidly press the DELETE button twice to erase the call record.
3. After you have erased the call record, the display will show the next call
record.

Deleting All Call Records

While you are reviewing an individual call record, you can delete the all calls
in memory.
1. Press either the review UP or review DOWN button to enter review call re-
cords mode.
2. Press and hold the DELETE button for about 5 seconds.
3. All call records will be deleted and the display will indicate the Stand-By
Screen. The display will indicate "TOTAL 00
-END OF LIST-
- 21 -
21
NEW 00".