Handset Ringer Volume; Handset Receiver Volume; Base Volume; Setting The Area Code - Aastra Maestro 4625 Owner’s Owner's Manual

Handset ringer volume

You can choose from three volume
settings for the handset ringer:
, and (the factory setting).
To change the ringer volume
1. If the Handset Ring prompt is not on the
display, press the
the prompt appears.
2. Press the
you press it, you hear the next ring
setting.
3. Press e.

Handset receiver volume

The sliding volume control on the
left side of the handset adjusts the
volume level for what you hear on
the handset. There are three
settings: low volume
(middle position), and high
volume .

Base volume

The sliding volume control under
the right edge of the base sets the
volume level for the base ringer and
the base speaker. It can be set
anywhere between Off, low volume
, and high volume

Setting the area code

You can enter one area code so that
incoming local calls appear in the
Callers List without it. This lets you
display key until
display key. Each time
, medium
.
dial local numbers directly from the
Callers List without having to
remove the area code first.
,
To add or change the area code
1. Press c.
2. Press the
3. Press the
(whichever appears on the display).
4. You can use
specific digit.
5. Press d to remove any
existing digits.
OR
Enter the three-digit number using the
dial pad.
6. Press the
To delete your area code
1. Press c.
2. Press
3. Press d.
4. If you want to delete the item, confirm it
by pressing the
d again. If you don't want to
delete the item, press c or
e.
14
display key.
or display key
or to move to a
< >
display key.
.
display key or press