Table of Contents
Advertisement
Helpful hints
Base lights
Base light
Flash
You have an incoming
quickly
call.
Flash
You have a call on hold.
Solid
The handset is busy.
Charge light
Solid
The handset battery is
charging.
Callers light
Flash
You have a new caller in
slowly
your Callers List.
Intercom light
Flash
The base is calling the
quickly
handset or the handset is
calling the base.
Solid
You are on an intercom
call.
Message light
Flash
You have new messages.
slowly
Talk/Mute light
Flash
You have an incoming
quickly
call.
Solid
You are on a handsfree
call.
Flash
Mute is activated
Locating the base.
For the best performance, locate the
base centrally in your house,
preferably in an open area, away
from refrigerators, fluorescent lights,
TV's, etc. In addition, the base
should be plugged directly into a
wall outlet that is not controlled by
a switch. Do not use a power bar.
Do not use a telephone line cord
extension cord. Keep the handset in
a location where it will be as close
to standard room temperature as
possible.
The phone doesn't work.
Make sure the battery is installed
properly in the handset.
Make sure the battery is charged.
Test the AC outlet; make sure it isn't
a switched outlet. Make sure the
base is the only item plugged into
the power outlet. Do not use a
power bar. Reset the phone by
changing the security code (see
page 13).
You cannot get a call through.
You must subscribe to tone service
from your local telephone
company.
26
Advertisement
Table of Contents
