Table of Contents
Advertisement
1. Press s.
2. Enter the number using the dial pad.
Numbers can have up to 16 digits. If you
require a pause (for example, between
a telephone number and an access
code), press h where you
want the pause.
Note: Each pause is 2 seconds. Enter
as many pauses as you need. A
indicates a pause has been
entered.
3. Press the
display key.
4. If you don't want to enter a name press
.
To enter a name, use the dial pad. (See
Rules for entering names, on this page.)
If you make a mistake, use the
d,
<
, and
5. To quit and start over, press e.
6. Press the
display key.
To save a number from the display
1. Ensure that a number is on the display.
(This could be a predialed, redialed, or
Callers List number.)
2. Press s.
3. Follow the instructions on the display.
4. If you entered a name, press the
display key.
Entering names
Rules for entering names
>
keys.
1. Press the key with the desired letter
repeatedly until that letter appears on
the display.
The letters are printed on the dial pad
keys. Names can have up to 16
characters.
2. Advance to the next letter by pressing
>
the
key or the
3. Use
to move backward to insert or
<
delete letters.
4. Press d to delete a letter.
[
5. Press the
for each letter.
6. Press the
space between letters.
7. When you have finished, press the
display key.
Note:
You don't always have to
press the
letter is on a different key.
Example:
To enter the name
, °, ››.
‡‡‡, °°,
>
Chart for special characters
The following symbols are not
shown on your dial pad keys.
Symbol
& ' ( ) , - .
Press ⁄ until the desired
symbol is displayed.
21
display key.
or
]
to change the case
display key to enter a
>
key if the next
, press:
Ruth
Advertisement
Table of Contents
