4. Close the bezel.
Replace the air baffle
To replace the air baffle, complete the following steps:
1. Align the air baffle pins with the holes on the fan cage and the pin hole on the
2. Lower the air baffle into the server until the air baffle is seated firmly.
98
System x3400 M2 Types 7836 and 7837: Installation and User's Guide
a. Press in on the rear of the sliding hinge mount until it extends beyond the
edge of the bezel, and hold it in place.
Hinge assembly
b. Align the sliding hinge mount with the hinge pin on the hinge assembly on
the chassis.
c. Press the sliding hinge mount against the hinge pin until the sliding hinge
mount snaps onto the hinge pin.
Note: When you lock the server left-side cover, it locks both the cover and the
bezel.
rear of the chassis.
Air baffle
pinch tab
Hinge pin
Air baffle
Sliding hinge mount