Table of Contents
Advertisement
7. Remove the air baffle assembly. Lift the rear or the air baffle up; then, press the
Removing the fan cage assembly
To remove the fan cage assembly, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Carefully lay the server on its side so that it is lying flat and facing up.
blue tab (on top of the fan cage) on the air baffle assembly to the left and lift it
from the server and set it aside.
Note: It might be easier to remove the air baffle if you lift up the plastic tab that
is over the DIMMs in the rear of the server.
Air baffle
pinch tab
on page 32.
all external cables.
Air baffle
Chapter 2. Installing optional devices
43
Advertisement
Table of Contents
