Dae2P/Dae3P Front Led Display - EMC CLARiiON DAE2P Hardware Reference Manual

About DAE2P and DAE3P disk enclosures
Figure 1-2
1-4
DAE2P/DAE3P Hardware Reference
For increased clarity, the following figures depict the disk enclosure outside
of the rack cabinet. Your disk enclosure may be installed in a rackmount
cabinet as shown in
As shown in Figure
lights for each disk module, and two disk enclosure status lights. The
enclosure status lights are visible with the front bezel installed.
Fault LED
(Amber)
Disk Activity Fault LED
LED
(Amber)
(Green)

DAE2P/DAE3P front LED display

A blue power LED indicates a DAE3P enclosure operating at four
gigabits per second. The power LED is green in DAE2P enclosures,
and DAE3Ps operating at two Gb.
Figure 1-3 and Figure 1-4
visible from the rear of the enclosure. Each highly-available enclosure
includes two link control cards and two power supply/system
cooling (power/cooling) modules.
Figure 1-1.
1-2, the front LED display contains two status
show the DAE2P/DAE3P components
Power LED
(Green or Blue)
EMC2166a