Vcci Class 1 Ite; Emissions Regulations Compliance - HP Model 715/100XC - Workstation Handbook

VCCI Class 1 ITE

Emissions Regulations Compliance

Any third–party I/O device installed in HP system(s) must be in accordance with the
requirements set forth in the preceding Emissions Regulations statements. In the
event that a third–party noncompliant I/O device is installed, the customer assumes
all responsibility and liability arising therefrom.
Compliance to these regulations requires the use of shielded cables.
Electrostatic Discharge (ESD) Precautions
Electrostatic charges can damage the integrated circuits on printed circuit boards. To
prevent such damage from occurring, observe the following precautions when un-
packing and installing the board.
Stand on a static–free mat.
Wear a static strap to ensure that any accumulated electrostatic charge dis-
charges from your body to ground.
Connect all equipment together, including the static–free mat, static straps,
routing nodes, and peripheral units.
Keep uninstalled printed circuit boards in their protective antistatic bags.
Once you have removed the printed circuit boards from their protective antis-
tatic bags, handle them by their edges.
v