HP Model 715/100XC - Workstation Handbook page 50

3. Enter the following command line to set the attributes of the device file:
chmod 666 /dev/crt24
4. Make a backup copy of /usr/lib/X11/X0screens by entering the following
command line:
cp /usr/lib/X11/X0screens /usr/lib/X11/X0screens.backup
5. Use a text editor, such as vuepad or vi, to edit the following file:
/usr/lib/X11/X0screens
6. Edit the file so that every line begins with a pound sign (#).
7. Add the following line to the file exactly as shown:
/dev/crt24
8. Save the changes and close the file.
9. Enter the following command:
/etc/reboot
10. The system shuts down and starts to reboot. Press and hold
the following message is displayed:
Selecting a system to boot. To stop selection
process press and hold the ESCAPE key.
In a few seconds, the following message appears:
Terminating selection process.
A short time later, the following message appears:
Searching for potential boot devices. To
terminate search, press and hold the ESCAPE key.
Return
Return
Return
when
Esc
Configuration 3–19