Verifying The System Operation With Supportwave - HP Model 715/100XC - Workstation Handbook

Verifying the System Operation with SupportWave

SupportWave contains the Support Tools Manager to verify system operation.
You can access the Support Tools Manager while in a terminal window; if you are
using HP–VUE as your interface, you can also access the Support Tools Manager
through the sys_admin directory.
Three interfaces are available with the Support Tools Manager: a command–line
interface (accessed through the cstm command), a menu interface (accessed through
the mstm command), and the graphical user interface (accessed through the xstm
command)
To invoke the command–line interface, type the following in a terminal window:
# cstm
The following screen appears:
********************************************************************************
******
******
******
******
******
******
******
******
******
****** (C) Copyright Hewlett Packard Co. xxxx
******
******
********************************************************************************
Please Wait. System mapping in progress . . .
Please type HELP or ? to list available commands.
CSTM>
At the prompt, you can enter several commands. To see what commands are
CSTM>
available, type the help command.
To verify the system operation, type the following:
CSTM>
Return
SUPPORT TOOLS MANAGER
Command Line Interface
Version x.xx.xx
Part Number xxxxx–xxxxx
All Rights Reserved
verify all
Return
******
******
******
******
******
******
******
******
******
******
******
******
Troubleshooting 4–21