Installing Eisa Assembly Components (Retaining Clips); Installing The Connector Bucket; Connecting The Eisa Board - HP Model 715/100XC - Workstation Handbook

Installing the EISA Assembly Components (Retaining Clips)
Insert the connector bracket into the bucket, and then use a Phillips screwdriver to
tighten the screw.
Figure 5–32. Installing the Connector Bucket
Insert the EISA board into the connector on the adapter board. Push firmly to ensure
a secure connection. Refer to Figure 5–29.
EISA Board
Adapter Board
Figure 5–33. Connecting the EISA Board to the Adapter Board
5–32 Field Replaceable Units