802.3 Network Connector; Built-In Graphics Connector; Serial I/O Pins - HP Model 715/100XC - Workstation Handbook

Pin No.
1
2
3
4
5
6
7
8
9

802.3 Network Connector

Figure 1–3 shows the location of the connector for the 802.3 (ETHERNET) network.
Connect an ETHERNET transceiver to this connector for communicating with a net-
work.
Built–In Graphics Connector
If the workstation does not have the CRX, HCRX, or VISUALIZE graphics option
installed, use the built–in graphics connector to connect the monitor's video cable to
the system. If the workstation is equipped with optional graphics, connect the moni-
tor or external graphics unit to the optional graphics connect as described below. If
you are setting up a dual monitor system, connect one monitor to the built–in graph-
ics connector and the other monitor to the optional graphics connector.
1–10 Product Information
Table 1–2. Serial I/O Pins
Signal Description
DCD Data Carrier Detect
RXD Receive Data
TXD Transmit Data
DTR Data Terminal Ready
GND Ground
DSR Data Set Ready
RTS Request To Send
CTS Clear To Send
RI Ring Indicator