Default Scsi Ids - HP Model 715/100XC - Workstation Handbook

Internal System Drives:
System SCSI Drive(s)
1st Winchester Drive (if present, uses SCSI ID 6)
2nd Winchester Drive (if present, uses SCSI ID 5)
Floppy Disk Drive* (if present, uses SCSI ID 0)
CD–ROM Drive (if present, uses SCSI ID 2)
4–mm DDS Tape Drive (if present, uses SCSI ID 3)
External Device Drives:
External SCSI HP 6000 Series 660A Disk Subsystem,
Product No. C2213A (These are not default IDs as shipped –
you must set the IDs to the correct setting.)
1st Winchester Drive (ID No. 4)
2nd Winchester Drive (ID No. 3)
3rd Winchester Drive (ID No. 0)
4–mm DDS Tape Drive (ID No. 3)
Magneto–Optical Drive (ID No. 0)
600–MB CD–ROM (ID No. 2)
External SCSI HP Standalone
Magneto–Optical Drive (C1701A) (ID No. 0)
CD–ROM Drive (A1999A) (ID No. 2)
20–GB Magneto–Optical Autochanger (C1700A)
st
1 (ID No. 3)
nd
2 (ID No. 4)
rd
3 (ID No. 5)
*Model 715/64, 715/80, 715/100, and 715/100XC workstations have a PC–
style floppy and do not use a SCSI address for the floppy drive.
NOTICE:
3–2 Configuration
Figure 3–1. Default SCSI IDs
These SCSI IDs are the recommended IDs for each
storage device. If an existing device already uses an
ID, select an alternate ID.