Replacing The Pre-Separation Pad - Kodak E1030 Series User Manual

Replacing the pre-separation pad

A-61997 1 August 2022
5. Re-install the pre-separation pad by aligning the slots with the holes
on the pre-separation pad and snapping it into place.
6. Close the scanner cover.
1. Remove the pre-separation pad by grasping it and pulling it straight
out.
2. Discard the worn pre-separation pad.
3. Install the new pre-separation pad by aligning the slots with the
holes on the pre-separation pad and snapping it into place.
4 Maintenance
35