Image Selection; System Log / Event Log; Saving Snapshots; Recording Video Sequences - Bosch NWD-455V03-20P Operating Instructions Manual

FlexiDome IP
6.1.2

Image selection

You can view the image on a full screen.
– Click on one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or
M-JPEG tabs below the video image to switch between the
different displays for the camera image.
6.1.3

System log / Event log

The System log field contains information about the operating
status of the camera and the connection. These messages can
be saved automatically in a file. Events such as the triggering or
end of alarms are shown in the Event log field. These messages
can be saved automatically in a file.
6.1.4

Saving snapshots

Individual images from the video sequence that is currently
being shown on the Livepage can be saved in JPEG format on
the computer's hard drive.
1. Click the camera icon
2. The image is saved at a resolution of 704 × 576/480 pixels
(4CIF). The storage location depends on the configuration
of the camera.
6.1.5

Recording video sequences

Sections of the video sequence that is currently being shown on
the Livepage can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
Bosch Security Systems
Operation via the browser | en 33
to save single images.
Operating Instructions V 1.0 | 2006.12