Network Connection; System Requirements; Establishing The Connection - Bosch NWD-455V03-20P Operating Instructions Manual

FlexiDome IP
5

Network connection

A computer with Microsoft Internet Explorer can be used to
receive live images from the camera, control cameras and
replay sequences stored on the local hard drive. The camera is
configured over the network using the browser or via the Con-
figuration Manager (supplied with the product). The configura-
tion options using the menu system of the camera itself are
limited to setting up the lens and network.
NOTICE!
i
The camera can also be connected to DIBOS 8.0, VIDOS and
BVMS video management systems as well as third party video
management systems.
5.1

System requirements

(see page 17 for more detailed requirements)
– Microsoft Internet Explorer version 6.0 or higher
– Monitor resolution 1024 × 768 pixels, 16 or 32 bit color
depth
– Intranet or Internet network access
To play back live video images, an appropriate MPEG ActiveX
must be installed on the computer. If necessary, the required
software and controls can be installed from the product CD
provided.
a. Insert the CD into the CD-ROM drive of the computer.
If the CD does not start automatically, open the root
directory of the CD in Windows Explorer and double
click MPEGAx.exe.
b. Follow the on-screen instructions.
5.2

Establishing the connection

The camera must be assigned a valid IP address to operate on
your network. The default address pre-set at the factory is
192.168.0.1
1. Start the Web browser.
2. Enter the IP address of the camera as the URL.
Bosch Security Systems Operating Instructions
Network connection | en 29
V 1.0 | 2006.12