Table of Contents
Advertisement
FlexiDome IP
3.
Left-click the fields to be activated. Activated fields are
marked red.
4.
If necessary, click Select all to select the entire video
frame for monitoring.
5.
Right-click any fields you wish to deactivate.
6.
Click OK to save the configuration.
7.
Click the close button (X) in the window title bar to close
the window without saving the changes.
7.13
Alarm e-mail
As an alternative to automatic connecting, alarm states can also
be documented by e-mail. In this way it is possible to notify a
recipient who does not have a video receiver. In this case the
camera automatically sends an e-mail to a user defined e-mail
address.
7.13.1
Send alarm e-mail
Select On if you want the unit to automatically send an alarm e-
mail in the event of an alarm.
7.13.2
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP
standard (Simple Mail Transfer Protocol). Outgoing e-mails are
sent to the mail server via the address you entered. Otherwise
leave the box blank (0.0.0.0).
7.13.3
Layout
You can select the data format of the alarm message.
Bosch Security Systems
Configuration via the browser | en 79
Operating Instructions
V 1.0 | 2006.12
- Quick Links:
- Configuration
- Defaults
- Network Connection
Hide quick links:
Advertisement
Table of Contents
