Changing Profiles - Bosch NWD-455V03-20P Operating Instructions Manual

48 en | Configuration via the browser
NOTICE!
i
Stream 2 is always transmitted for alarm connections and
automatic connections. Take this into account when assigning
the profile.
Preview for
Select which video data stream should be displayed in the pre-
views. You can deactivate the display of the video images if the
performance of the computer is affected too strongly by the
decoding of the data streams.
– Check the box for the required data stream.
7.4.2

Changing profiles

You can change individual parameter values within a profile and
the name. You can switch between profiles by clicking the asso-
ciated tabs.
NOTICE! The profiles are rather complex. They include a
number of parameters that interact with one another. Therefore
i
it is generally best to use the default profiles. The profiles
should only be changed if you are completely familiar with all
the configuration options.
NOTICE! The parameters as a group constitute a profile and are
i
dependent on one another. If you enter a setting outside the
allowed range for a parameter, the nearest valid value is
substituted when the settings are saved.
V 1.0 | 2006.12 Operating Instructions
FlexiDome IP
Bosch Security Systems