Maytag MER5775RAB - Ceramic Range Use And Care Manual page 9

C D
The controi pand is designed for ease in programming. The dispiaywindow on the controi shows time of day, timer and oven functions.
Controi pand shown inciudes modal specific features. (Styiing may vary' depending on modeL]
A
B
c ¸
D
F
H
Broii
Bake
More+/Less-
Timer
Cook & HoM
Cban
Favorite
CHock
Keep Warm
CANCEL
Use for broiling and top browning.
Use for baking and roasting.
Enters or changes time, oven
temperature. Sets HI or LO broil
Sets Timer.
Bakes for a preset time, then hoids food
warm for 1 hour.
Use to set seif-ciean cyclic.
Use to set and save a specific Cook &
Hoid procedure.
Use to set time-of-day chock.
Use to keep cooked food warm in oven.
Cancels all operations except Timer
and Clock.
Using the Touchpads
Press the desired pad.
Press More+ or Loss- to enter time or temperature.
, A beep will sound when any pad is touched.
° A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the More+ or Less-
pads, the time or temperature will automatically be
entered. If more than 30 seconds elapse between touch-
ing a function pad and the More+ or Loss- pads, the
function will be canceled and the display will return to the
previous display.
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and
Favorite pads for three seconds.
2. Press the More+ or Loss- pad to
select 12 or 24 hour.
3. Set the time of day following the
directions below.
To set the Clock:
1. Press the Clock pad.
, The colon flashes in the display.
2. Press More+ or Loss- to set the time of day.
, Colon continues flashing.
3. Press the Clock pad again or wait four .......................
seconds. The colon stops flashing.
Less ?
When electrical power is supplied or after a ........................... ....
power interruption, the last clock time before
power was interrupted wiii flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook or Delay Clean or Cook & Hold.
cont.
8