Sabbath Mode - Maytag MER5775RAB - Ceramic Range Use And Care Manual

Precision touch control 700 electric smoothtop
Hide thumbs Also See for MER5775RAB - Ceramic Range:
Table of Contents

Advertisement

Available languages

Available languages

Q
Automatic
Shut-Off/
Sabbath
Mode
The oven will automatically turn off after 12 hours if you
accidentally Heaveit on= This safety feature can be turned off=
TO cancel
the 12-hour
shut-off
and run the
oven
continuously
for 72 hours:
1. Set the oven to bake [see page 10]=
2= Press and hoHdthe Clock pad for five seconds.
° SAb will be dispHayedand flash for five seconds.
, SAb will then be dispHayedcontinuousHy until turned off
or until the 72-hour time limit is reached.
° BAKE will also be displayed if a bake cycle is in use
while the oven is in Sabbath Mode.
, BAKEis the only function that operates during the
Sabbath Mode. Aft other functions (Time,,,Keep Warm,
Clean, etc.) are locked out during the Sabbath Mode.
To cance!
Bake when in Sabbath
Mode:
Press CANCEL=
, BAKE will turn off in the display.
, No beeps will sound.
TO cancel
the Sabbath
Mode:
1. Press the Clock pad for five seconds.
OR
2. After 72 hours, the Sabbath Mode will end.
, SAb will flash for five seconds.
, The time of day will return to the display.
Sabbath
Mode
Notes:
, Sabbath Mode can be turned on at any time with or
without the oven on.
, Sabbath Mode cannot be turned on if the touchpads are
locked out or when the door is locked.
If the oven is baking when Sabbath Mode is set, BAKE
will go out at the end of the baking cycle. There will be
no audible beeps.
If the oven light is desired while in Sabbath Mode, it
must be turned on before the Sabbath Mode is started.
When the Sabbath Mode is started, no preheat beep wiii
sound.
All prompts, messages and beeps are deactivated when
Sabbath Mode is active.
The automatic door lock does not operate during the
Sabbath Mode.
Pressing CANCEL will cancel a bake cycle, however the
control will stay in the Sabbath Mode.
If power fails, the oven will power up in Sabbath Mode
with 72 hours remaining and no cycle active.
Changing
Temp °F/°C
1= The factor}, default setting for temperature is FahrenheiL
2. To change the setting, press and hold the CANCEL and Bake
pads at the same time for three seconds.
3. A single beep will sound and the current setting will be
displayed (°F or °C)=(if no change is made, the range will
return to the existing setting after 30 seconds.[)
4. To change the setting, press the More+ or Less- pad. Press
again to return to existing setting. Wait five seconds and the
setting will be complete.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents