GE JB910 - Profile 30 in. Electric Convection Range Owner's Manual page 8

Usingthe surface units.
How to Set
LOLu_ HI Push, the, knob in and, _-turn in either
i // _ dn'ectlon to the setting you want.
_}_ 9 At both OFFand HI the control
2 _ _ _8 clicks into position. You max hear
/
sli ,ht clicking sounds
during co,,kin ,,
indicating the control is keeping the
power lexel you set.
Be sure you turn flTecontrol knob to
OFFwhen you finish cooking.
A HOTSURFACE indicator
light, on the
cooktop, will glow when any radiant
element is turned on. It will remain
on tmfil the surthce is cooled to
approximately 150°E
Hot surface indicator light will:
come on when the unit ishot to the touch.
stay on evenafter the unit is turned oK
g/ow unti/ the unit is coo/ed to approxlmate/y
150°E
FRONT
- -
BR DGE
BURNER (_ BURNER
0 0
6
!
Using the Bridge Burner
To use the bridge burnex; turn the
left fi'ont control knob to the BRIDGE
BURNER settings.
For flfll bridge sm'li_ce refit operation,
also turn on the left rear sm_i_ce unit.
To use only the fl'ont surlace unit, turn
the control knob to the FRON7"BURNER
settings.
8
FRONT
Dual Surface Unit Control Knob
Thewht front surface unit has 2 cooking sizes
to select from so you can match the sl2eof the
unit to the sl2e of the cookware you are using.
To use the small sm'fi_ce refit, tm'n
the control
knob to the SMALL BURNER
settin ,s
To use the lmge surfi_ce unit, tm'n
the control knob to the
LARGE BURNER
settings.