GE JB910 - Profile 30 in. Electric Convection Range Owner's Manual page 36

Cleaningthe glass cooktop.
Cleanyourcooktopafter
each spill. UseCERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_JIA BRYTE _' Cermnic
Cooktop Cleaner on tile glass cooktop.
()theF (Te;I/IIS IIKIV not be ;is
effective.
To maintain and protect tile stnbfilce (ff
vouJ glass cooktop, tollow these steps:
[] Before using tile c(>oktop fi>r the
fi_t time, clean it with CEI_MA
BRYTE' Cermnic Cooktop Cleanel:
This helps protect the top and
makes
cleant/p
easier.
[] Dail) use of CEIL_MA BRYTE"
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
[] Shake tile cleaning cream well.
Apply a lew drops 0f CEIL_dMA
BRYTE ': Ceramic Cooktop Cleaner
directly to tile cooktop.
[] Use a paper towel or CEIL_d_4A
BRYTE _)Cleaning Pad fi)r Ceramic
Cooktops to clean the entire
cooktop stli]il ce.
[] Use a d_ cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE:It is veryimportantthatyouDONOT heat
thecooktop until it hasbeencleaned thoroughly
Use a CERAMA BRYTE '_ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING: DAMAGE to yourglasssurfacemay
occurif youusescrub padsotherthanthose
recommendecL
] _Mlow tile cooktop to cool.
[] Spread a fray drops of CEIL_MA
BRYTE <_) C eramic Cooktop Cleaner
on tile entire burned residue area.
[]
Using tile included CERAMA
BRYTE _'Cleanino Pad for Ceramic
Cooktops, mb tile residue area,
applying pressure as needed.
[] If any residue remains, repeat the
steps listed above as needed.
[] For additional protection, alter all
residue has been remoxed, polish
the entire stu_i_ce with (_EI_U_dVIA
BRYTE ': Ceramic Cooktop Cleaner
and a paper towel.
The CERAMA BRYTE '_ Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or nicked
blade.
Heavy, Burned-On Residue
[] _Mlow tile cooktop to cool.
[] Use a single-edge razor blade scraper
at approximamly a 45 ° angle against
tile glass sm_hce and scrape tile soil.
It will be necessary to apply pressure
to tile razor scraper in order to
remove tile residue.
[]
_Mter scraping with tile razor scraper;
spread a few drops of CEIL_d_IA
BRYTE (': Ceramic Cooktop Cleaner
on tile entire burned residue area.
Use tile CEIOd_IA BRYTE ': Cleaning
Pad to remove any remaining
residue.
[]
For additional protection, after all
residue has been removed, polish
tile entire stw{i_ce with CEIL_4A
BRYTE <_> C eramic Cooktop Cleaner
and a paper towel.
3C