Starting Again From Hibernation - Toshiba Portege 2010 User Manual

❖
5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
❖
❖
7 Click OK.
8 Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility, see the
electronic version of your system user's guide.

Starting again from Hibernation

To start up the computer from Hibernation mode, press the
power button until the on/off light turns green. The computer
returns to the screen you were using.
If you activate Hibernation by closing the display panel, you
can restart the computer by opening the display panel.
When I close the lid
Set this option to Hibernation so that the computer goes
into Hibernation mode when you close the display panel.
Click DC only for the settings to apply only when you
are using battery power.
Click All for the settings to apply whether you are using
battery power or outlet power.
Enhancing Productivity
Using Hibernation
131