Toshiba Portege 2010 User Manual page 152

152
If Something Goes Wrong
Problems when you turn on the computer
The computer starts but, when you press a key, nothing
happens.
You are probably in Stand By mode and have a software or
resource conflict. When this happens, turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press
Clearing the condition may get the computer running, but it
won't solve a resource conflict. Read the documentation that
came with the conflicting device and
conflict" on page
The computer is not accessing the hard disk or the
optional external diskette drive.
Your computer normally loads the operating system from the
hard disk. If you have a hard disk problem, you will not be
able to start the computer. Insert a system diskette into the
optional external diskette drive and press the F12, or left or
right arrow keys to choose it as your boot-up device.
The computer displays the
message.
The computer was placed in Stand By mode and the battery
has discharged. Data stored in the computer's memory has
been lost.
To charge the battery, leave the computer plugged into a live
wall outlet for 48 hours. For more information, see
and the batteries" on page
The computer displays the
message.
Make sure there is no diskette in the optional external diskette
drive. If there is one, remove it and press any key to continue.
If pressing any key does not work, press
restart the computer.
,
Ctrl
156.
WARNING RESUME FAILURE
160.
Non-System disk
, and simultaneously.
Alt Del
"Resolving a hardware
or
disk error
, and
Ctrl, Alt
"Power
Del to