Starting Again From Hibernation Mode - Toshiba A1 User Manual

7 Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
8 Do one of the following:
❖
❖
9 Click OK to close the Normal Power Properties window.
10 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.

Starting again from Hibernation mode

To start the computer from Hibernation mode, press and
release the power button. The computer returns to the screen
you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE
Click DC only if you want the settings to apply only
when you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
If your computer is running on batteries, you cannot start it
again by opening the display panel. To turn the system back
on, press the power button.
Learning the Basics
Using Hibernation
99