110
Learning the Basics
Using Hibernation
The computer saves the state of the system, including all open
programs and files, to the hard disk, and then powers down
completely.
If you are connected to a Windows
server), follow these steps to power down the computer using
Hibernation:
1
Click Start, then Shut Down.
The Shut Down window appears.
2
Select Hibernate from the drop-down list of options.
3
Click OK.
The computer saves the state of the system, including all open
programs and files, to the hard disk, and then powers down
completely.
Going into Hibernation mode more quickly
You can also put the computer into Hibernation mode in three
ways:
❖
By pressing the hotkey combination Fn+F4.
❖
By pressing the power button.
❖
By closing the display panel.
Starting again from Hibernation
Use these instructions to restart the computer when you enter
Hibernation mode by closing the display panel:
❖
When using AC power, open the display panel.
❖
When using battery power, open the display panel and
press the power button until the on/off light changes to
green.
The computer returns to the screen you were previously
using.
®
network server (domain