Starting Again From Hibernation Mode - Toshiba Tecra M3 Series User Manual

4 Select Hibernation for the options you want.
❖
When I press the power button
Set this option to Hibernation so that the computer will go
into Hibernation mode when you press the power button.
❖
When I close the lid
Set this option to Hibernation so that the computer will go
into Hibernation mode when you close the display panel.
5 Click OK.
6 Click OK again, then close the Control Panel.
The computer is now set to automatically go into Hibernation
when your option settings occur.
For more information about the Power Saver utility, see
NOTE
"TOSHIBA Power Saver" on page
Once the computer is configured, put the computer into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the hibernation
options taken.

Starting again from Hibernation mode

Use these instructions to restart the computer when you enter
Hibernation mode by closing the display panel:
❖
When using AC power, open the display panel.
❖
When using battery power, open the display panel and
press the power button until the on/off light changes to
green.
The computer returns to the screen you were previously
using.
Learning the Basics
Powering down the computer
179.
129