Table of Contents
Advertisement
The Set the range window appears.
Sample Set the range window with AC only option
Sample Set the range window with DC only option
8
Do one of the following:
❖
❖
9
Click OK to close the Full Power Properties window.
10
Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again from Hibernation
To start up the computer from Hibernation mode, press and
release the power button until the on/off icon glows green.
The computer returns to the screen you were using.
If you went into Hibernation mode by closing the display
panel, you can start the computer again by opening the
display panel.
Click AC only or DC only, whichever is appropriate,
for the settings only when you are using battery
power.
Click All for the settings to apply whether you are
using battery power or outlet power.
Learning the Basics
Using Hibernation
33
Advertisement
Table of Contents
