Technical Data; Installation; Unpacking; Fixing To The Adjacent Units - John Lewis JLBIDW1200 Instruction Manual

Technical data

Dimensions
Electrical connection - Voltage - Overall
power - Fuse
Water supply pressure
Capacity

Installation

Warning! It is dangerous to alter the
specifications or attempt to modify this
product in any way.
This appliance is heavy. Care should be
taken when moving it.
Care must be taken to ensure that the
appliance does not stand on the
electrical supply cable.
Any electrical work required to install
this appliance must be carried out by a
qualified electrician or competent
person.
Any plumbing work required to install
this appliance must be carried out by a
qualified plumber or competent
person.

Unpacking

• Remove all packaging before positioning
the machine.
• If possible, position the machine next to a
water tap and a drain.
Width
Height
Depth
Information on the electrical connection is given on the
rating plate on the inner edge of the dishwasher door.
Minimum
Maximum
Warning! Carefully follow the
instructions on the enclosed template
for building in the appliance and fitting
the furniture panel.
Insert the machine after adjusting the levelling
with the adjustable feet. When inserting the
machine, ensure that the water inlet and drain
hoses are not kinked or squashed.
During all operations that involve accessibility
to internal components the dishwasher has to
be unplugged.
Be sure that once the appliance has been
installed, it is easily accessible for the service
engineer in the event that a repair is required.
Fixing to the adjacent
units
The appliance must be secured against tilting.
Therefore make sure, that the counter it is
fixed under, is suitably secured to a fixed
structure (adjacent kitchen unit cabinets,
wall).
26
59,6 cm
81,8 - 89,8 cm
55,5 cm
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
12 place settings