1. Manuals
  2. Brands
  3. John Lewis Manuals
  4. Dishwasher
  5. JLBIDW1318
  6. User manual

John Lewis JLBIDW1318 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dishwasher
JLBIDW1318
User Manual

Advertisement

Table of Contents
loading

Related Manuals for John Lewis JLBIDW1318

Summary of Contents for John Lewis JLBIDW1318

  • Page 1 Dishwasher JLBIDW1318 User Manual...

  • Page 2: Table Of Contents

    Contents Setting and starting a programme Safety information Hints and tips Children and vulnerable people safety General Safety General Using salt, rinse aid and detergent Safety instructions What to do if you want to stop using multi- Installation tablets Electrical connection Loading the baskets Water connection Before starting a programme...

  • Page 3: Safety Information

    Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 Obey the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by the • manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp ends pointing •...

  • Page 5: Safety Instructions

    Safety instructions • This appliance complies with the E.E.C. Installation Directives. • UK and Ireland only. This appliance is fitted with Warning! Only a qualified a 13 A mains plug. If it is necessary to change person must install this the mains plug fuse, use only a 13 A ASTA (BS appliance.

  • Page 6: Disposal

    Disposal Warning! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance. Dishwasher User Manual...

  • Page 7: Product Description

    Product description 1. Upper spray arm 6. Air vent 2. Lower spray arm 7. Rinse aid dispenser 3. Filters 8. Detergent dispenser 4. Rating plate 9. Upper basket 5. Salt container Dishwasher User Manual...

  • Page 8: Control Panel

    Control panel 1. On/off button 4. Programme buttons 2. Display 5. Indicators 3. Delay button Indicators Indicator Description Extra dry Extra dry indicator. Rinse aid Rinse aid indicator. It is always off while the programme operates. Salt Salt indicator. It is always off while the programme operates. Dishwasher User Manual...

  • Page 9: Programmes

    Programmes Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • Extra dry 50° Eco • Crockery and cutlery • Wash 50 °C • Rinses • Dry • All • Prewash • Extra dry 45°-70°...

  • Page 10: Information For Test Institutes

    Water Energy Duration Programme (kWh) (min) Rinse hold 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. Information for test institutes For all the necessary information for test performance, send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is...

  • Page 11: Settings

    Settings Press and hold simultaneously Eco and Auto until Programme selection mode the appliance is in programme selection mode. and user mode How to enter user mode When the appliance is in programme selection Make sure the appliance is in programme mode it is possible to set a programme and to selection mode.

  • Page 12: The Rinse Aid Empty Notification

    German degrees French degrees mmol/l Clarke de- Water softener level (°dH) (°fH) grees 23 - 28 40 - 50 4.0 - 5.0 28 - 35 19 - 22 33 - 39 3.3 - 3.9 23 - 27 15 - 18 26 - 32 2.6 - 3.2 18 - 22...

  • Page 13: Airdry

    How to activate the acoustic signal for Caution! If children have the end of programme access to the appliance, it is Make sure the appliance is in user mode. advised to deactivate AirDry as opening the door may pose 1. Press Auto. •...

  • Page 14: Options

    Options The display shows the updated programme Desired options must be activated duration. every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other.

  • Page 15: Before First Use

    Before first use 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4.

  • Page 16: Filling With Rinse Aid

    Filling with rinse aid Caution! Use branded rinse aid for dishwashers only. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse.

  • Page 17: Daily Use

    Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser.
  • Page 18 The cutlery basket Warning! Knives with long blades, stored in an upright position, are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
  • Page 19 Caution! Ensure that the spray arms can rotate freely before you close the appliance door. Adjusting the height of the upper basket Caution! Never lift or lower the basket on one side only. To load very large plates move the upper basket to the higher position.

  • Page 20: Using The Detergent

    24 cm 27 cm Moving back the upper basket to the lower position 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. 20 cm Using the detergent 31 cm...

  • Page 21: Setting And Starting A Programme

    Setting and starting a If the door is opened for more than programme 30 seconds during the drying phase, the running programme ends. It does not happen if the The Auto off function door is opened by AirDry function. This function decreases energy consumption by deactivating automatically the appliance when it Do not try to close the appliance is not operating.

  • Page 22: Hints And Tips

    Hints and tips • Detergent tablets do not fully dissolve with General short programmes. To prevent detergent residues on the tableware, we recommend that The following hints will ensure optimal cleaning you use the tablets with long programmes. and drying results in daily use and also help to •...

  • Page 23: Before Starting A Programme

    • Make sure that glasses do not touch other glasses. • Put small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not move. • Make sure that the spray arm can move freely before you start a programme.

  • Page 24: Care And Cleaning

    Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make 2. Remove the filter (C) out of filter (B). a check regularly and, if necessary, 3.

  • Page 25: Cleaning The Spray Arms

    Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.

  • Page 26: Troubleshooting

    Troubleshooting If the appliance does not start or it stops during With some problems, the display shows operation. Before you contact an Authorised an alarm code. Service Centre, check if you can solve the The majority of problems that can occur problem by yourself with the help of the can be solved without the need to information in the table.

  • Page 27: The Washing And Drying Results Are Not Satisfactory

    Problem and alarm code Possible cause and solution The appliance stops and starts • It is normal. It provides optimal cleaning results and energy savings. more times during operation. The programme lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
  • Page 28 The washing and drying results are not satisfactory Poor drying results. • Tableware has been left for too long inside the closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. •...
  • Page 29 The washing and drying results are not satisfactory Dull, discoloured or chipped table- • Make sure that only dishwasher-safe items are washed in the appli- ware. ance. • Load and unload the basket carefully. Refer to "Loading cutlery and dishes". •...

  • Page 30: Technical Information

    Technical information Dimensions Width / height / depth (mm) 596 / 818 - 898 / 555 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water Capacity...

  • Page 31: Installation

    Installation Insert the appliance after the adjustment of the Warning! appliance level. When inserting the appliance, • It is dangerous to alter the ensure that the water inlet and drain hoses are specifications or attempt to not kinked or squashed. During all operations modify the appliance in any way.

  • Page 32: Water Connection

    Water connection • To the sink outlet spigot, securing it to the Water inlet connection underside of the work surface. This will prevent waste water from the sink running into the This appliance may be fed with either hot appliance. (maximum 60 °C) or cold water.
  • Page 33 must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the appliance drain hose spigot. Dishwasher User Manual...

  • Page 34: Electrical Connection

    Electrical connection • If necessary, have the domestic wiring system Warning! The manufacturer socket replaced. In case that the electrical cable accepts no liability for failure has to be replaced, contact your local repair to observe the following agent. safety precautions. •...

  • Page 35: Repairs - After Sales Service

    John Lewis, Liverpool 0151 709 7070 them here: John Lewis, Milton Keynes 01908 679 171 • Mod........John Lewis, Newcastle upon Tyne 0191 232 5000 • P.N.C........John Lewis, Norwich 01603 660 021 • S.N......... John Lewis, Nottingham 0115 941 8282...
  • Page 36 John Lewis, Stratford 020 8532 3500 John Lewis, Croydon 020 8662 4730 John Lewis, The Trafford Centre 0161 491 4040 John Lewis, Horsham 01403 214 740 John Lewis, Watford 01923 244 266 John Lewis, Ipswich 01473 275 850 John Lewis, Welwyn 01707 323 456...
  • Page 37 ENVIRONMENTAL CONCERNS marked with the symbol with the household Recycle the materials with the symbol . Put waste. Return the product to your local the packaging in applicable containers to recycle recycling facility or contact your municipal office. it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances.
  • Page 38 Dishwasher User Manual...
  • Page 39 Dishwasher User Manual...
  • Page 40 156914411-A-202017 ( Subject to change without notice. )

Table of Contents