When The Dishwasher Is First Installed; The Water Softener - John Lewis JLBIDW1200 Instruction Manual

When the dishwasher is first
installed
Before using your dishwasher for the first
time:
• Ensure that the electrical and water
connections comply with the installation
instructions
• Remove all packaging from inside the
appliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as "3 in 1", "4 in 1", "5 in 1"
etc... set the Multi tab function (see
"Multi tab function").

The water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would have
Water hardness
Clarke °TH
64 - 88 91 - 125
53 - 63 76 - 90
46 - 52 65 - 75
36 - 45 51 - 64
28 - 35 40 - 50
23 - 27 33 - 39
18 - 22 26 - 32
13 - 17 19 - 25
Adjusting the water hardness
mmol/l manually
9,1 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
10
a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water
hardness is measured in equivalent scales,
Clarke degrees, French degrees (°TH) and
mmol/l (millimol per litre - international unit
for the hardness of water).
The softener should be adjusted according to
the hardness of the water in your area. Your
local Water Authority can advise you on the
hardness of the water in your area.
setting
electronically
2 level 10
2 level 9
2 level 8
2 level 7
2 level 6
2 level 5
1 level 4
1 level 3
Use of salt
yes
yes
yes
yes
yes
yes
yes
yes