Machine Settings - Canon 3749B002 On-Screen Manual

> > Machine Settings
Contents Other Usages

Machine Settings

This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual:
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when making borderless copies.
Film print cutting range
Selects the cutting range of a film when scanning the 35 mm film in the film printing.
Auto Photo Fix setting
Selects whether or not to prioritize printing Exif information saved on a photo when Auto photo fix ON
is selected.
LAN settings
Change wireless/wired
Switches between wired LAN and wireless LAN. You can also disable LAN connection.
Wireless LAN setup
Configures the wireless LAN connection according to an access point or connection environment. If
the access point supports the WPS (Wi-Fi Protected Setup), you can configure a wireless LAN
easily. The access point settings can also be configured manually.
For details, refer to the printed manual: Getting Started
Confirm LAN settings
Displays the wireless or wired LAN configurations of the machine on the LCD, or prints this
information from the machine.
Other settings
Configures other network settings including the machine's network name, IPv4/IPv6 settings,
memory card sharing, WSD (Web Services on Devices) setting, etc.
Reset LAN settings
Sets the machine network settings back to the default.
Advanced Guide
Advanced Guide .
.
Troubleshooting