Loading Originals; Platen Glass - Canon 3749B002 On-Screen Manual

> Loading Paper / Originals
Contents

Loading Originals

Loading Originals
How to Load Originals for Each Function
Originals You Can Load
This section describes the procedure to load originals on the Platen Glass.
You may have to load the original in a different position depending on the function you selected in Copy,
Easy photo reprint, or Scan. Load the original in the correct position according to the selected function. If
you do not load the original correctly, it may not be scanned properly.
Important
After loading the original on the Platen Glass, be sure to close the Document Cover before starting
to copy or scan.
Note
For details on loading films, see
Loading Originals
You can load originals to copy or scan on the Platen Glass.
1.
Load an original on the Platen Glass.
Open the Document Cover.
(1)
Important
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
Do not hold the LCD or the Operation Panel.
Load the original WITH THE SIDE TO COPY OR SCAN FACING DOWN on the
(2)

Platen Glass.

Make sure of the proper position to load the original for each function.
See
How to Load Originals for Each Function
Important
Be sure to observe the following when loading the original on the Platen Glass.
- Do not place any objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass.
- Do not put any pressure of 4.4 lb / 2.0 kg or more on the Platen Glass, such as pressing
down the original.
Failure to observe the above may cause the scanner to malfunction or the Platen Glass to
> Loading Originals
Loading the Films .
.
Advanced Guide Troubleshooting