Checking The Ink Status - Canon 3749B002 On-Screen Manual

> Routine Maintenance
Contents

Checking the Ink Status

You can check the ink status on the LCD or with the ink lamps.
With the LCD on the Machine
Make sure that the power is turned on, and press the
(1)
Press the left Function button.
(2)
Check if any symbol (A) appears on the remaining ink volume screen.
Sufficient ink is left for printing if no symbol appears.
(Ink low) is low. Prepare a new ink tank.
The ink with
Note
You can also check the ink status on a screen of the LCD displayed while printing.
With the Ink Lamps
Make sure that the power is turned on, and open the Paper Output Tray gently.
(1)
Lift the Scanning Unit (Cover) until it stops.
(2)
See
Lift the Scanning Unit (Cover) until it stops.
Check the ink lamps.
(3)
Close the Scanning Unit (Cover) after confirming the ink lamp status.
Ink lamp is on
The ink tank is correctly installed and there is sufficient ink left for printing.
Ink lamp is flashing
Flashing slowly (at around 3-second intervals)
Ink is low. Prepare a new ink tank.
Flashing fast (at around 1-second intervals)
> Replacing an Ink Tank > Checking the Ink Status
in "Replacing Procedure".
...... Repeats
Advanced Guide Troubleshooting
button.
HOME