Canon 3749B002 On-Screen Manual page 53

>
Contents Scanning > Forwarding Scanned Data to the Computer
Forwarding Scanned Data to the Computer
You can forward scanned data to the computer with the USB cable or via a network.
This section describes the procedure to detect the type of original automatically with Auto scan, and
forward the scanned data to the computer connecting with the USB cable, according to the settings
specified with MP Navigator EX.
For other operations to save scanned data on a memory card or USB flash drive and to scan originals
from the computer, refer to the on-screen manual:
Important
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Note
You can select Auto scan only when forwarding scanned data to the computer with the USB
cable.
The machine can detect the following types of originals with Auto scan: photo, postcard, business
card, magazine, newspaper, text document, and DVD/CD. For other originals, use the computer to
specify the type or size of originals and scan them.
For details, refer to the on-screen manual:
Preparing for Scanning with the Operation Panel
Before scanning originals, check the following:
Are the necessary software applications (MP Drivers and MP Navigator EX) installed?
Install MP Drivers and MP Navigator EX from the Setup CD-ROM when they have not been installed
or have been uninstalled. To install MP Drivers and MP Navigator EX, select MP Drivers and MP
Navigator EX in Custom Install.
Are the type of original and processing method specified with MP Navigator EX?
When you forward scanned data to the computer with the Operation Panel, you can specify the
settings such as the type of original and processing method in Preferences of MP Navigator EX.
For details on the settings, refer to the on-screen manual:
Does the original to be scanned meet the requirements for the original to be loaded on the Platen
Glass?
For details, see Originals You Can Load
If the Machine Is Connected via USB or Wired LAN
Confirm that the connection with USB cable or LAN cable between the machine and the computer is
physically secure.
Important
Do not plug in or unplug the USB cable or LAN cable while the machine is scanning originals
with the computer.
If the Machine Is Connected over a Network
When you use a computer connected over a network, check the following:
Is the machine selected in the settings screen of the Canon IJ Network Scan Utility (Windows) or
Canon IJ Network Scanner Selector (Macintosh)?
For details on the setting procedure, refer to the on-screen manual:
Is the Canon IJ Network Scan Utility/Canon IJ Network Scanner Selector running?
For details, refer to the instructions for scanning over a network in the on-screen manual:
.
Guide
Advanced Guide
Advanced Guide .
Advanced Guide .
Advanced Guide
.
Troubleshooting
.
Advanced Guide .
Advanced