Printing From A Pictbridge Compliant Device - Canon 3749B002 On-Screen Manual

Advanced Guide > Printing on DVD/CDs
Device

Printing from a PictBridge Compliant Device

This section describes how to print photos on DVD/CDs (printable discs) from a PictBridge compliant
device.
Important
Depending on your PictBridge compliant device, you may not be able to print on the label side of
DVD/CDs.
For details, refer to your PictBridge compliant device's instruction manual .
You cannot print on 8 cm DVD/CDs.
1.
Make sure that the machine is turned on.
2.
Connect the PictBridge compliant device to the machine using a USB cable
recommended by the manufacturer of the device.
For details, refer to Printing Photographs Directly from a Compliant Device
3. Specify the print settings as follows.
Paper size: 12cmDVD/CD
Paper type: Default
Layout: Bordered or Default
You can perform image optimize settings using the menu on the LCD of your PictBridge compliant
device. For details, refer to
Note
If your PictBridge compliant device does not have setting menu, change the setting from the
machine.
Specifying the PictBridge Print Settings on the Machine
4.
Set the printable DVD/CD.
Attaching/Removing the CD-R Tray
5.
Start printing from your PictBridge compliant device.
Specifying the PictBridge Print Settings on the Machine
You can specify the PictBridge print settings on the machine.
Note
When a PictBridge compliant device is connected to the machine, the PictBridge print
settings screen can also be displayed by pressing the left Function button.
1.
Make sure that the machine is turned on.
2.
Settings on the HOME screen, then press the OK button.
Select
The Settings screen is displayed.
3.
Device settings, then press the OK button.
Select
> Printing on the Label Side of DVD/CDs
About PictBridge Print Settings
> Printing from a PictBridge Compliant
.
.