Checking The Ink Status With The Ink Lamps On The Operation Panel - Canon PIXMA E400 Series Online Manual

Checking the Ink Status with the Ink Lamps on the
Operation Panel
Note
The ink level detector is mounted on the machine to detect the remaining ink level. The
machine considers as ink is full when a new FINE cartridge is installed, and then starts
to detect a remaining ink level. If you install a used FINE cartridge, the indicated ink
level of it may not be correct. In such case, refer to the ink level information only as a
guide.
When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will
flash orange to inform you of the error. Count the number of flashes and take
appropriate action.
If an Error Occurs
In the copy standby mode, you can check the ink status with the Color Ink lamp and Black
Ink lamp.
* All the lamps on the operation panel are shown lit in the illustration below for explanatory
purposes.
(A) Alarm lamp
(B) Black Ink lamp
(C) Color Ink lamp
Color Ink lamp or Black Ink lamp lights
The ink is running low. Prepare a new ink cartridge.
Color Ink lamp or Black Ink lamp flashes, while Alarm lamp flashes
An error has occurred.
If an Error Occurs
* For some types of errors, the Alarm lamp may not flash.
Note
You can also check the ink status on the computer screen.
70