Table of Contents
Advertisement
4.3
Replacing the Hard Disk Drive
Follow these steps:
1.
Turn the computer over to access the base.
2.
Remove the two screws from the hard disk drive bay cover and remove the cover.
Figure 4-5
Removing the Hard Disk Drive Bay Cover
3.
Lift up (1), then pull out the hard disk drive; then flip the hard disk drive over and unplug the
hard disk drive connector.
Figure 4-6
Removing the Hard Disk Drive
If you want to install a new hard disk drive, reverse the steps described above.
Disassembly and Unit Replacement
4-7
Advertisement
Table of Contents
