Replacing The Hard Disk Drive Module; Replacing The Dimm Modules - Acer Aspire 4937 Series Service Manual

Hide thumbs Also See for Aspire 4937 Series:
Table of Contents

Advertisement

Replacing the Hard Disk Drive Module

1. Place the HDD carrier on the HDD.
3. Place the HDD Module in the HDD bay as shown and slide it in the direction of the arrow to connect the
interface.

Replacing the DIMM Modules

NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is
shown.
1. Insert the DIMM Module flush with the connector and press down to lock in place.
Chapter 3
2. Replace the four securing screws (two each side).
141

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents