Removing The Display Bezel; Removing The Display Panel Screws And The Display Connectors - Acer TM7300 Series Service Manual

3. Pull out and remove the display bezel by pulling on the inside of the bezel sides.
Figure 4-27

Removing the Display Bezel

4. Remove the four display panel screws, and unplug the inverter and display panel connectors.
Then tilt up and remove the display panel.
Figure 4-28

Removing the Display Panel Screws and the Display Connectors

4-20
Screw list:
M2.5L6 (bind head) x4
Service Guide