Dell 3010cn - Color Laser Printer Manual page 82

NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet Ethernet
Settings
Current Ethernet Settings
MAC Address
Port LPD
Settings
Port9100
FTP
E-Mail Alert
SNMP Agent
NOTE: The settings in the Port Settings item are valid only when the printer is rebooted. When you change or set this item, click the Restart printer to
apply new settings. button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
TCP/IP Host Name
Settings
IP Address AutoIP
Mode
DHCP
BOOTP
RARP
Manually
Set
IP Address
Subnet Mask
Gateway Address
Auto Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T Half-Duplex Selects 10Base-T Half-Duplex as the default value.
10BASE-T Full-Duplex Selects 10Base-T Full-Duplex as the default value.
100BASE-TX Half- Selects 100Base-T Half-Duplex as the default value.
Duplex
100BASE-TX Full- Selects 100Base-T Full-Duplex as the default value.
Duplex
Displays the current settings of Ethernet.
Displays the printer's MAC address.
Select the check box to enable the LPD.
Select the check box to enable the Port9100.
Select the check box to enable the FTP port.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP can be selected as the transport
protocol.
Specifies the host name up to 15 alphanumeric characters. The default name remains valid if no entry is made.
Automatically sets the IP address.
Uses DHCP to set the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Enables the IP address set in IP Address.
Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a
value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.
Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and
255. Note that 255.255.255.255 is invalid.
Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0
and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.