Dell 3010cn - Color Laser Printer Manual page 81

E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP used for the e-mail feature and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you
want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Port Status
Primary SMTP Gateway
Reply Address
SMTP Server Connection
E-Mail List 1
E-Mail List 2
Select Alerts for List 1 Supplies Alerts
Paper Handling Alerts Displays the status, and whether to receive an E-Mail Alert for paper handling.
Service Call
Select Alerts for List 2 Supplies Alerts
Paper Handling Alerts Displays the status, and whether to receive an E-Mail Alert for paper handling.
Service Call
Print Server Settings
The Print Server Settings tab includes Basic Information, Port Settings, TCP/IP, E-Mail Alert, and SNMP pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
System Printer Name
Settings
Location
Contact Person
Administrator E-mail
Address
Asset Tag Number
EWS Settings Auto Refresh
Auto Refresh Interval
Displays the port status.
Displays the primary SMTP gateway.
Displays the IP address of servers connected with SMTP protocol when data is incoming.
Displays the status of the SMTP server connection.
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 1.
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 2.
Displays the status, and whether to receive an E-Mail Alert for consumables.
Displays the status, and whether to receive an E-Mail Alert for Service Calls.
Displays the status, and whether to receive an E-Mail Alert for consumables.
Displays the status, and whether to receive an E-Mail Alert for Service Calls.
Specifies the name of the printer up to 31 alphanumeric characters.
Specifies the location of the printer up to 63 alphanumeric characters.
Specifies the contact name, number, and other information of the printer administrator and service center up to
63 alphanumeric characters.
Specifies the contact address of the printer administrator and service center up to 63 alphanumeric characters.
Specifies the asset tag number.
On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600
seconds.