Xerox C8 - DocuPrint Color Inkjet Printer System Administration Manual page 73

Do c u Co lo r 80 0 0/ 70 0 0 S y s te m A dm i n is t r a ti o n G u id e
An E Table Settings window (for the specific Decurler Type
selected) opens:
• The values in the above six windows control a mechanism
in the digital press that compensates for the curl formed in
the fusing process; this is done by inducing an equal but
opposite curl in the paper. It is similar to passing a sheet
over a sharp radius, and thereby producing a curl in the
direction of the radius.
• The paper curl values that you recorded earlier from your
calculations determine the values in the six windows in the
above screen.
• The six windows are divided into two categories (Lower
and Upper) with each having three discrete set points of
10 mm, 6 mm, and 2 mm. Each category is used to
address upwards or downwards curl direction.
For example, paper that is "cupped" or curled upwards is
adjusted using the Upper category of settings. Paper that
is "bridged" or curled downwards is adjusted using the
Lower category of settings.
1 . Too l s M od e
1-49