1. To o ls M od e
1- 8 4
•
Lead Registration: Use this feature to adjust the lead
edge of the image for Side 1 and/or Side 2 registration.
–
The factory default setting is zero (0).
–
The arrows on the right side of the illustration show the
paper feed direction.
–
The + sign, the left-pointing arrow, and the red lines
shows the direction the image will move on the paper
when the value is increased.
–
If you select a negative value (for example, -1.0 mm),
the image on the paper moves toward the right.
D oc u Co l or 8 00 0/ 7 00 0 S y s te m A d mi n i s tr a ti o n G ui d e