Decurler Specifications; Decurler Setup - Xerox C8 - DocuPrint Color Inkjet Printer System Administration Manual

Do c u Co lo r 80 0 0/ 70 0 0 S y s te m A dm i n is t r a ti o n G u id e
The digital press is equipped with an automatic curl control system
that uses the variables listed above to determine the amount of
pressure needed at different Decurlers to reduce the curl.
KEY POINT: If you notice that output prints have too much curl,
first try flipping over the stack of paper in the paper tray being
used. You can also try running the job from a different tray. If curl is
still a problem, refer to the Decurler Settings A-D table on the next
page for your market area to change the default Decurler settings.

Decurler Specifications

The Decurler has both top and bottom adjustment arms that apply
pressure to the paper based on the selections made on the
Decurler Setup screen. The degree of pressure is applied
independently to the top and bottom Decurler arms.

Decurler Setup

When you select the Decurler Setup feature, the following window
opens:
The Decurler Setup features are discussed in more detail on the
following pages.
1 . Too l s M od e
1-37