1. To o ls M od e
1- 4 6
Using the Decurler E Table Settings
1. Load the Paper Tray with the paper you wish to use for a job.
Make the correct paper weight selections on the tray for the
paper being used and run a few test prints. If there is too
much curl, continue with step 2.
2. On the Machine Defaults 2 screen, touch the Deculer E Table
Settings button. The Deculer E Table Settings window opens:
KEY POINT: The digital press retains the last set values for all the
E Table Settings options. Therefore, before you make or change
any E Table selections, copy and use the E Table Settings Chart
located at the back of this book to record the default, manufacturer
settings for each E Type (E1-E6).
NOTE: The manufacturer defaults for the above screen are Single
Paper Weight, Type E1, and Simplex Straight.
3. Select the Paper Type: Single Paper Weight or Mixed Paper
Weight.
D oc u Co l or 8 00 0/ 7 00 0 S y s te m A d mi n i s tr a ti o n G ui d e